Medical and Food Tray Sealing Option is available on most Sealers

CTT Series

Impulse Heating Table Top Skin Packaging Machine


The CTT Series skin packaging machines are designed for entry level and low volume applications. They incorporate a stationary heating system with instant on/off heaters, which come up to heat instantly during cycles and turn off for loading/unloading. The CTT skin packaging machines have timer control for repeatability and an optional accurate turbine regulator and automatic film cut off. These machines are a sturdy welded steel construction with removable panels for servicing. The CTT Series is available in the standard size 18 inches by 24 inches as well as smaller custom sizes.


The operator places the master card on the machine bed, loads product and depresses the cycle start button to initiate the skin packaging cycle. At the end of the heating cycle, the operator manually lowers the film clamping frame toward the vacuum box while automatic timer controlled vacuum is applied. The operator then opens the film clamping frame, pulls the finished card forward and closes the film clamping frame. The operator cuts the finished card film to separate it. A new section of film has automatically been loaded into the clamping frame during this process. The finished skin card is now ready for die cutting, if necessary, on one of our RT Series machines.

Standard Features:

  • Film preheat timer
  • Vacuum timer
  • Manual frame lift with gas cylinder assist
  • Manual film frame clamping system
  • Main power ON / OFF switch
  • Cycle start push button
  • Preheat override push button
  • Tubular Quartz impulse heating system
  • Emergency stop push button
  • Powder coated charcoal grey


Electrical: (1824)

Electrical: (1218)

220 Volts / 1 Phase / 25 Amps

220 Volts / 1 phase / 15 Amps


110 Volts AC

Heating system:

Quartz 4.8 KW

Vacuum System:

1 Turbine @ 175 CFM

Maximum card size:

Maximum card size:

18.0” x 24.0”

12.0” x 18.0”

Film width: (1824)

Film width: (1218)



Film roll diameter maximum:


Maximum product height:


Cycle time:

Variable 30 to 60 seconds

Approximate dimensions (Base machine):

38.0” D x 33.5” W x 30.5” H

Working height:

Based on customer table height

Approximate weight: (Base machine)(1824)

Approximate weight: (Base machine):(1218)

175 LB

125 LB


CTT - 1824:


CTT - 1218:


Standard voltage for CTT-1218:

220 / 15 Amps

115 / 1 phase:



  • Vacuum turbine speed control
  • Automatic film cut off system (220V only)
  • Floor stand, brings machine to 40” working height
  • Alternate voltage, 208/230 Volts, 3 Phase

Please contact the VISUAL sales office should you require a quote on a size, specification or option not listed above.


Approximately Stock – 3 weeks

F. O. B.

Factory ( Arlington , TX )

Payment Terms:

Based on total order value, see Standard Terms & Conditions.

Visual Packaging, Thermoforming, Form Fill & Seal